Share this:

Levent 2002 Core Drilling Rig

LEVENT 2002 Core Drilling Rig is an all-hydraulic diamond core drill rig with a wide range of options and accessories.It consists of three main parts: Drilling unit, Control unit and a Power unit. As an option the drill unit can be mounted on carriers for special purposes like a; a narrow crawler for underground use, or a wide crawler for surface use.

It is suitable for a variety of drilling methods in both underground and surface operations such as core drilling, grout hole drilling, probing etc. LEVENT 2002 can also be equipped for TOP hammer drilling and DTH drilling. The possibility to carry out DTH hammer drilling in combination with coring, will result in valuable time gains. Besides enabling rock survey to be conducted through drill cuttings analysis.


Do you have a question about this product? Are you looking for similar equipment?

LEVENT 2002 Core Drilling Rig uses the best technology available for diamond core drills. All tube jointing, thread breaking,feeding,wireline hoist sequences,are controlled from a control console which can be positioned to suit the setup. Feeding is done by a direct cylinder and chain system. The drill can be equipped with three different feed lenghts,and two different sizes of rotation units to suit rod size and drilling applications. The drill unit can be powered by an electric motor or diesel engine. When the drill rig is equipped with the electric power unit, an optional diesel engine for tramming is available. It is of primary importance that drill rods,core barrels and coring bits are of the right type and quality,matched to the rock drill and to the prevailing rock conditions. Bearing in mind core drill’s speed of rotation,its rating and chuck diameter, LEVENT 2002 is best suited to drill holes 48-76 mm in diameter (A-N) using both conventional as well as wire line rods. The spindle inner diameter is 78 mm (3.07 in) in the N-size rotation unit.